3－苯氧甲基－6－（2，4－二氟苯基）－7H-1,2,4-三唑并[3,4-b][1,3,4]噻二嗪的合成与晶体结构研究

由苯氧乙酸出发，经多步反应，制得3-苯氧甲基－4－氨基－5－巯基－1，2， 4－三唑，它与2-氯－2'，4'－二氟苯乙酮进行环化反应，生成3-苯氧甲基－6－（ 2,4-二氟苯基）－7H-1,2,4-三唑并[3,4-b][1,3,4]噻二嗪，通过元素分析、红外 光谱、核磁共振氢谱与碳谱、质谱进行表征，并利用单晶X射线衍射法测定其结构 。晶体属单斜晶系、P2_(1/c)空间群，a = 1.339(3) nm, b = 1.4683(4) nm, c = 0.8606(2) nm, β = 108.49(2)°, Z = 4, F(000) = 736, R_1 = 0.0509。还 对均三唑并噻二唑两类稠杂环的晶体结构作了比较。     

离子液体[BMim]BF4对SDS水溶液表面活性和聚集能力的促进

采用表面张力测定法和核磁共振谱等方法研究了阴离子表面活性剂十二烷基硫酸钠(SDS)在水溶性室温离子液体[BMim]BF4/水混合溶剂中的表面性质及聚集行为, 发现极少量[BMim]BF4的介入就可以显著降低SDS的临界胶束浓度, 提高体系的表面活性; 且[BMim]BF4在混合溶剂中所占的摩尔分数(x1)在一定范围内(0相似文献   

二氧化钒和三氧化二钒研究进展

VO₂和V₂O₃是优异的光、电、磁热敏材料，在多种技术领域中具有广阔的应用前景，已成为国内外新颖功能材料研究的热点之一。本文综述了VO₂和V₂O₃的粉体、陶瓷和薄膜的研究进展，并对相关问题进行讨论。     

The Synthesis of Gracillin and Dioscin：TWO Typical Representatives of Spirostanol Glycosides

Two spirostanol saponins(gracillin and dioscin)which have the typical sugar moieties were synthesized facilely by a general approach.     

两个具有混合卤素桥的闭式十二顶双镍十硼烷簇合物的合成与结构

研究了[NiX_2(PPh_3)_2](X = Br, I)在二氯甲烷等溶剂中与B_(10)H_(10)~ (2-)的反应，对形成的族合物[(μ-Br_(0.85)Cl_(0.15)-(Ph_2PC_6H_4)_2Ni_2B_ (10)H_6Cl(PPh_3)]·0.5CH_2Cl_2(1), [(μ-I_(0.1)Cl_(0.9)(Ph_2PC_6H_4) _2Ni_2B_(10)H_6Cl(PPh_3)]·0.25CH_2Cl_2(2)进行了元素分析、红外光谱、飞行 时间二次离子质谱和X射线单晶结构分析等表征。两个族合物均为闭式十二顶双镍 十硼烷，镍、镍之间还分别存在Cl, Br和Cl，I桥且Cl，Br或I的占有率不同。簇合 物还具有两个邻位环化的Ni-P-C-C-B五元环。研究结果进一步证实：阴离子对反应 产物有影响，二氯甲烷参与了反应。     

铜离子对烟草多酚氧化酶变性和复性影响的热力学研究(英)

在有无5 mmol·L^-1 CuSO₄存在的两种情况下，运用荧光光谱研究了烟草多酚氧化酶在盐酸胍诱导下的变性和复性平衡。烟草多酚氧化酶在6.0 mol·L^-1盐酸胍变性30 min(25 ℃)即完全失活。荧光光谱结果表明：铜离子能够提高烟草多酚氧化酶的结构稳定性和抗盐酸胍变性的能力，进而影响烟草多酚氧化酶在盐酸胍诱导下的变性和复性过程。没有外源铜存在的情况下，盐酸胍诱导的烟草多酚氧化酶变性和复性是一个可逆的二态过程；在5 mmol·L^-1 CuSO₄存在的条件下，由于结合了Cu²⁺的酶的中间态稳定性增加，显示特征荧光，结果显示，外源铜存在时，盐酸胍诱导的烟草多酚氧化酶变性和复性是一个可逆的三态过程。根据相应模型，进行了热力学计算。上述实验结果得到酶活性测定的进一步证实，在6 mol·L^-1盐酸胍中放置5，10，15，20，25，30 min，烟草多酚氧化酶的剩余活性分别为18.7%，11.7%，8.9%，6.6%，3.6%，0.06%，但在5 mmol·L^-1 CuSO₄存在的条件下，剩余活性则分别为60.3%，44.6%，42.5%，40.2%，25.6%，25.3%。     

β-环糊精与水杨酸包合物的合成与结构

合成了β-环糊精与水杨酸的包合物b-cyclodextrin-salicylic acid (β-CD-sal) [(C₄₂H₇₀O₃₅)₂•(C₇H₆O₃)₂•(H₂O)₂₄], 用X射线单晶衍射、元素分析和核磁共振对其分子结构进行了表征. X射线单晶衍射结果表明: 包合物的晶体属于单斜晶系, 空间群为C₂, a＝1.9269(5) nm, b＝2.4395(7) nm, c＝1.6095(4) nm, β＝107.816(5)°, V＝7.203(3) nm³, Z＝4, D_c＝1.373 g•cm^－3, F(000)＝3176, R[I＞2σ(I)]＝0.0971. 在形成的2∶2包合物中, β-环糊精通过羟基间的氢键形成头对头的二聚体, 两个水杨酸分子以不同的形式与环糊精形成包合物, 其中一个水杨酸分子寄居于环糊精的空腔中, 而另一个水杨酸则位于由两个环糊精形成二聚体的空隙中.     

Solid Phase Catalytic Oxidation of Alcohols by Polymer Supported Rare Earth Catalysts

Oxidation of alcohols to the corresponding aldehydes or ketones is one of the most fundamental reactions in organic chemistry [1,2]. Some of the products of the oxidation exhibit an important role in the organic synthesis as well as pharmaceutical synthesis. In most reactions, the lanthanide complexes show satisfied catalytic activities for some compounds. Furthermore, there has been increasing interest in the lanthanide complexes and several reports have appeared in the literature [3, 4]. But the exploitation of these complexes for the oxidation of some organic substrates has been limited. Here we reported a method for the preparation and the catalytic properties as well as the recycling of lanthanide complexes in oxidation of alcohols.The synthetic procedure for the polymer supported lanthanide complexes is shown as following(scheme 1):●-NH2+CICH2COOH(C2Hs)3N→●-NHCH2COOHM=Ce(Ⅲ), Tb(Ⅲ), Sm(Ⅲ)scheme 1The oxidation of benzyl alcohol was carried out in the presence of iodosylbenzene by the polymer supported Ce(Ⅲ), Tb(Ⅲ) and Sm(Ⅲ) catalysts at 80℃ for 4.0h, the yields of benz-aldehyde are as following (table 1):Table 1 Oxidation of benzyl alcohol with the supported catalysts**Reaction condition: benzyl alcohol 0.1 mmol, iodosylbenzene 0.15mmol,catalyst 0.2mg, 80℃ for 4.0h in 1,2-dichloroethane.It can be seen from the table that the Tb(Ⅲ) complex shows higher catalytic activity for the oxidation of benzyl alcohol. Further investigation is now being carded on to optimize the results.     

647W灯泵浦大功率连续Nd:YAG激光器

 报道了一台灯泵浦大功率连续Nd:YAG激光器。对影响大功率固体激光器模块输出功率和光束质量的主要因素进行了理论分析，并提出提高激光器效率的措施：对聚光腔的形状、结构和材料以及冷却方式，泵浦灯的参数和材料，激光晶体的参数和镀膜进行优化设计，采用径向固定的谐振腔镜。该灯泵浦YAG晶体棒总体电光转换效率为4%，光束质量为22mm·mrad，输出功率647W。     

Simulation of a 2-site Langmuir model for characterizing the sorption capacity of Cs and Se in crushed mudrock under various ionic strength effects

The sorption capacity of cesium (Cs) and selenium (Se) in crushed mudrock was demonstrated in this study through a 2-site Langmuir model. To employ such a numerical analysis, batch tests were applied in this study in synthetic seawater and groundwater with sorption/desorption kinetic experiments (time-dependent) and different concentrations (10^?2–10^?7 M). The 2-site sorption models, which correspond to two rate constants (λ ₁ and λ ₂), might be more adequate than 1-site sorption models in characterizing Cs and Se sorption/desorption according to the least square errors between the numerical analysis and the results of the batch tests. The fitting results showed that a 2-site Langmuir model is capable of appropriately describing Cs and Se sorption in mudrock. Consequently, the sorption capacity was calculated at about 0.06 mol/kg for Cs and at 0.015 mol/kg for Se.